The continual filtration process includes constant filter cloth washing to provide a clean cloth belt for every filter cycle. With this type of system, the entire process can be observed from feed to discharge and the filter requires no tank so the inventory of the slurry is reduced to what is actually being filtered.
The Compositech horizontal belt filter line features tubular frames for ease of cleaning and special corrosion resistant materials are used in filter construction and for coatings. We use non-lubricated FDA approved polymer bearings, fully enclosed troughing supports, full coverage drip pans with flanged drains, and fully encapsulated drainage belts. Our horizontal belt filters are available in widths up to 4 meters wide. Our largest horizontal belt filter is a modular system that can be sized and resized according to customer needs. Each module is 2.5 meters long and increases the filtration area by 10 square meters. 
The deep troughing lips on our filters are designed to fully contain any spillage through the deckles and the return of the spilled solids to the discharge end of the filter. Compositech's horizontal belt filters are also easily maintained. The non-drive side of the frame is designed for easy removal of the drainage belt, pulleys and support decks without complete disassembly of the filter. The filters can be totally enclosed for control of fumes and sprays, fitted with several cake washing options, and designed to incorporate wash down systems.
Compositech has been providing specifically designed horizontal belt filter stations in a myriad of configuration since 1991. In addition to our Compositech horizontal belt filter, we stock replacement parts for other filter brands including gaskets, seals, drainage belts, bearings, bearing housings, wear strips, slide strips, and edge trackers.
Compositech makes replacement parts for Andritz, Beloit Jones™, Celleco™, Dorr-Oliver®, Eimco®, IMPCO™, Komline-Sanderson® and most other brands of horizontal belt filters. Our replacement parts meet or exceed the quality and material of OEM components.
Compositech is not an authorized replacement parts supplier or service supplier for GL&V®, Celleco™, Beloit Jones™, IMPCO™, Dorr-Oliver®, Komline-Sanderson®, or Eimco® brands of process equipment or parts therefore. Nor is Compositech in any way associated with GL&V USA Inc. or its affiliated entities or with FLSmidth A/S or its affiliated entities. All Compositech replacement parts are manufactured by and warranted by Compositech and not by the original equipment manufacturer.